Assembly Required
The Champion Audio Amplifier Kit with Pre-Amplifier Refer: Silicon Chip Magazine January 2013 An amplifier and pre-amplifier combination for all those general-purpose audio projects. It uses the AN7511 audio IC to deliver 2W music power into 8 ohms from a 9 to 12V supply. Features low distortion, two inputs (mixed 1:1), over-temperature protection (auto-limiting), Mute and standby control. Pre-amplifier is also suitable for microphones and electric guitars, and can be separated from the amplifier for individual use. Kit supplied with silk-screened PCB, heatsink and PCB mount components.
Features:
- Operating voltage range: 4 - 13.5VDC
- Music power: 3W @ 9 - 12V
- Frequency Response: -2.5dB @ 20Hz, -0.2dB @ 20kHz
- Gain: 34dB for Amplifier, up to 58dB with pre-amplifier
- Input Sensitivity for Amplifier only: 52mV RMS @ 5V, 125mV RMS @ 9 - 12V
- Input Sensitivity for Amplifier & Pre-amplifier: 2mV RMS @ 5V, 5mV RMS @ 9 - 12V
- Quiescent current: 2mA (Pre-amplifier) + 30-60mA (Amplifier)
- Standby current: 2mA (Pre-amplifier) + 1-10uA (Amplifier)
Product Specifications
- Kit Form : Short Form (circuit only)
- Difficulty : Simple
- Estimated Construction Time : 60.0min
- Tools required : Soldering Iron
- Application Field : Audio Amplifier with Pre-Amplifier
- Additional optional items : 10kohm potentiometer
- PCB Width : 41.0mm
- PCB Length : 101.0mm
- Audio Device : Amplifier
- Signal Input Level : 52.0mV
- Output power : 3.0W
- Audio distortion : 0.25%
- Audio frequency range : 20.0Hz, 20.0kHz
- Signal to noise ratio : 65.0dB
- Audio power supply : 3W
- Audio gain : 34.0dB
Length : 20 cm |
Width : 7 cm |
Height : 3 cm |